12V5A 60W LED Module Power Supply KC KCC Power Supply for LED Module and LED Strips and LED Sign
1. *Product Description*:
--Advantages:
* AC input 185-264V, 50/60Hz
* DC output 12V 5A 60W
* Efficiency: >80%
* IP20 indoor use, 100% OEM compatible, 2 years warranty;
* Constant voltage, single input and output design;
* Workable from -20 degree to 60 degree;
* Separated level for thermal dissipation;
* Protections: short circuit, over load and over voltage;
* Defective rate is less than 1% in 2 years.
* 100% full load burn-in test before delivery;
* NO MOQ, regular stock, quick delivery;
* Application: LED Sign, LED Advertising, LED Illumination, etc.
1. Output Characteristics:
1.1 Output Power
| Voltage | Min. Load | Rated Load | Peak@10mS | Rated Output Power |
| DC 12V | 0A | 5A | 66W | 60W |
1.2 Line Regulation
| Voltage | Min. Load | Rated Load | Line Regulation | Load Regulation |
| DC 12V | 0A | 5A | ±3% | ±5% |
1.3 Ripple and Noise
Under nominal voltage and nominal load,the ripple and noise are as follows when
measure with Max.Bandwidth of 20MHz and Parallel 47uF/0.1uF,crossed connected at testing point.
| Voltage | Ripple and Noise(Max.) |
| 12V DC | 200mV p-p |
1.4 Turn on delay time: 2Second Max.at 220Vac input and output Max.load.
1.5 Rise time:40 mS Max.at 220Vac input and output Max load.
1.6 Overshoot: 5% Max.When power supply at turn or turn off.
2 Protection Functions:
2.1 Short circuit protection: auto recovered when short circuit faults remove.
2.2 Over current Protection: auto recovered when over current faults remove.
2.3 Over load protection: auto recovered when over current faults remove.
3 Test: Drop test
4 Safety Requirement:
4.1 Safety Standard: Safety: Design by IEC60950 standard.
4.2 DIELECTRIC STRENGTH Hi-Pot:
Primary to secondary:1200Vac/10mA/60S for type test.
Primary to case:1200Vac/10mA/60S for type test.
4.3 Iusulation resistance:Primary to secondary:10MΩ min at 500V DC.
5 EMI Requirement:
Designed according to the following standard:
5.1 K 60950-1(2011-12)
2. *Related Products*:
| KC, KCC Certification Power Supply Series |
| Model | Size/mm | Input Voltage | Power | Output Voltage | Current |
| HX-60-12KC | 159*98*42 | 185-264vAC | 60W | 12V | 5A |
| HX-75-12KC | 159*98*42 | 185-264vAC | 75W | 12V | 6.25A |
| HX-100-12KC | 159*98*42 | 185-264vAC | 100W | 12V | 8.33A |
| HX-60-24KC | 159*98*42 | 185-264vAC | 60W | 24V | 2.5A |
| HX-75-24KC | 159*98*42 | 185-264vAC | 75W | 24V | 3.13A |
| HX-100-24KC | 159*98*42 | 185-264vAC | 100W | 24V | 5A |
| HX-150-12KC | 190*110*50 | 185-264vAC | 150W | 12V | 12.5A |
| HX-200-12KC | 190*110*50 | 185-264vAC | 200W | 12V | 16.67A |
| HX-150-24KC | 190*110*50 | 185-264vAC | 150W | 24V | 6.25A |
| HX-200-24KC | 190*110*50 | 185-264vAC | 200W | 24V | 8.33A |
| HX-250-12KC | 190*110*50 |
|
Product Tags:
|
|
60W LED Module Power Supply 159*98*42mm 12V 5A LED Driver Images
|
